Review
● Dimensions H- 950mm (1000mm including plinth, base and spikes) W-240mm D-250mm
● Construction 16mm MDF all sides apart from front baffle which is 19mm.
● Totally undamped cabinet
● 3 acoustic loading bracing shelves with multiple apertures, mounted below the tweeter, below the bass mid driver and below the sub bass driver
● 1 bracing shelf mounted near the bottom of the enclosure containing an internal port
● Internal port vents into a small chamber containing 2 asymmetric length reflex ports tuned as a system to 21Hz
● 2 x 6.5” Bass units with impregnated paper cone and curved optimised acoustic profile
● High power Ferrite magnet driving a 25mm voice coil with aluminium former and Faraday distortion cancelling copper ring
● 25mm soft dome tweeter
● Double Ferrite magnet system
● Copper Clad Aluminium voice coil wire on a Fibreglass Former and Faraday distortion cancelling copper ring
● All drivers connected in positive phase
● Sub bass driver starts roll off at 80Hz 6db/Oct fed by “Enclosed Field Iron Core Inductor”. Features high power without saturation, very low DCR and almost no stray magnetic field
● Bass/Mid driver crossover frequency 2200Hz nominal 12 db/Oct. Utilises an “Enclosed Field Ferrite Core Inductor “in the signal path. Very low DCR nominal stray fields
● Tweeter attenuation by misaligned Zobel network as opposed to conventional L-Pad
● All Drivers have only one component in the signal path
● Phase optimised through the crossover region
● In room usable frequency response 20Hz-22KHz (dependent on room)
● Sensitivity: 87db 1 watt 1 Metre